3. Check Combination Meter Input Signal
WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON.
- Check voltage between combination meter harness connector M24 terminal 27 (O/B) and ground.
- When seat belt is fastened : Approx. 12V
- When seat belt is unfastened : Approx. 0V
OK or NG
OK >> Replace the combination meter. Refer to Removal and Installation of Combination Meter
NG >> GO TO 4.