FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 1701 (Body, Lock & Security System) › Power Door Lock System › Front Door Lock Actuator RH Check

Front Door Lock Actuator RH Check

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FRONT DOOR LOCK ACTUATOR RH SIGNAL 
    1. Turn ignition switch OFF.
    2. Check voltage between BCM connector M20 terminals 65, 66 and ground.
      FRONT DOOR LOCK ACTUATOR RH SIGNAL

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      M20 65 Ground Door lock/unlock switch is turned to LOCK 0 -> Battery voltage
      66 Door lock/unlock switch is turned to UNLOCK 0 -> Battery voltage
      Fig 1: Checking Voltage Between BCM Connector M20 Terminals 65, 66 And Ground
      G04175784Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 2.

    NG: Replace BCM. Refer to "REMOVAL AND INSTALLATION "

  2. CHECK DOOR LOCK ACTUATOR HARNESS 
    1. Disconnect BCM and front door lock actuator RH.
    2. Check continuity between BCM connector M20 terminals 65, 66 and front door lock actuator RH D114 terminals 1, 2.
      BCM CONNECTOR M20 TERMINALS 65, 66 AND FRONT DOOR LOCK ACTUATOR RH D114 TERMINALS 1, 2

      Terminal Continuity
      65 2 Yes
      66 1 Yes
    3. Check continuity between BCM connector M19 terminals 65, 66 and ground.
      BCM CONNECTOR M19 TERMINALS 65, 66 AND GROUND

      Terminals Continuity
      65 Ground No
      66 No
      Fig 2: Checking Continuity Between Connector M20 Terminals 65, 66 And Front Door Lock Actuator RH D114 Terminals 1, 2
      G04175785Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace front door lock actuator RH. Refer to , "REMOVAL AND INSTALLATION "

    NG: Repair or replace harness.

About FixVault