Component Inspection

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch "OFF". (Stay for at least 5 seconds.)
Remove line pressure switch. Refer to , "LOCATION OF ELECTRICAL PARTS ".

Push and release line pressure switch and check continuity between transfer terminal cord assembly terminal and ground.

TRANSFER TERMINAL CORD ASSEMBLY TERMINAL AND GROUND

Terminal	Condition	Continuity
1 - Ground	Push line pressure switch	Yes
1 - Ground	Release line pressure switch	No

Fig 1: Checking Continuity Between Transfer Terminal Cord Assembly Terminal And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, replace the clutch pressure switch.