Special Service Tools
WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
SPECIAL SERVICE TOOLS
| Tool number (Kent-Moore No.) Tool name |
Description | |
|---|---|---|
| KV40104000 ( - ) Flange wrench |
Removing and installing drive pinion lock nut a: 85 mm (3.35 in) dia. b: 65 mm (2.56 in) dia. |
|
| KV381054S0 (J-34286) Puller |
Removing front oil seal | |
| ST30720000 (J-25405) Drift |
|
|
| KV40104100 ( - ) Attachment |
Removing side flange | |
| ST36230000 (J-25840-A) Sliding hammer |
Removing side flange | |
| KV38100200 (J-26233) Drift |
Installing side oil seal a: 65 mm (2.56 in) dia. b: 49 mm (1.93 in) dia. |
|
| KV38107900 (J-39352) Protector |
Installing side flange | |
| KV38100800 (J-25604-01) Attachment |
Fixing unit assembly a: 541 mm (21.30 in) b: 200 mm (7.87 in) |
|
| ST3127S000 (J-25765-A) Preload gauge 1: GG91030000 (J-25765) Torque wrench 2: HT62940000 ( - ) Socket adapter (1/2") 3: HT62900000 ( - ) Socket adapter (3/8") |
Measuring pinion bearing preload and total preload | |
| KV10111100 (J-37228) Seal cutter |
Removing rear cover | |
| ST3306S001 ( - ) Differential side bearing puller set 1: ST33051001 (J-22888-20) Puller 2: ST33061000 (J-8107-2) Base |
Removing and installing side bearing inner race a: 28.5 mm (1.122 in) dia. b: 38 mm (1.50 in) dia. |
|
| ST30031000 (J-22912-01) Puller |
Removing pinion rear bearing inner race | |
| KV40105230 ( - ) Drift |
Installing pinion rear bearing outer race a: 92 mm (3.62 in) dia. b: 86 mm (3.39 in) dia. c: 45 mm (1.77 in) dia. |
|
| ST30613000 (J-25742-3) Drift |
Installing pinion front bearing outer race a: 72 mm (2.83 in) dia. b: 48 mm (1.89 in) dia. |
|
| ST30611000 (J-25742-1) Drift bar |
Installing pinion front bearing outer race (Use with ST30613000) | |
| ST30901000 (J-26010-01) Drift |
Installing pinion rear bearing inner race a: 79 mm (3.11 in) dia. b: 45 mm (1.77 in) dia. c: 35.2 mm (1.386 in) dia. |
|
| KV38100300 (J-25523) Drift |
Installing side bearing inner race a: 54 mm (2.13 in) dia. b: 46 mm (1.81 in) dia. c: 32 mm (1.26 in) dia. |
|
| - (J-8129) Spring gauge |
Measuring turning torque | |
| - (J-34309) Differential shim selector tool |
Adjusting bearing preload and pinion gear height | |
| - (J-25269-4) Side bearing disc (2 Req'd) |
Selecting pinion height adjusting washer | |