FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 2136 (Automatic Transmission) › On-Vehicle Service › Control Valve Assembly › Removal

Control Valve Assembly: Removal

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove side cover. Refer to "SIDE COVER ".
  2. Disconnect solenoid valve connectors.
  3. Disconnect control valve assembly bolts and remove control valve assembly.
    Fig 1: Identifying Control Valve Assembly Bolts
    G04906231Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault