FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 2136 (Automatic Transmission) › On-Vehicle Service › Revolution Sensor Replacement

Revolution Sensor Replacement

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake air duct.
  2. Disconnect electrical connector.
  3. Remove revolution sensor from A/T.
  4. Reinstall any part removed.
    • Do not reuse seal bolt. 
      Fig 1: Locating Revolution Sensor
      G04906220Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault