FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 2191 (Instrument Panel) › Removal And Installation › Instrument Panel Assembly › Removal and Installation-Instrument Panel › Removal

Removal and Installation-Instrument Panel: Removal

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before servicing, turn the ignition switch off, disconnect both battery terminals, then wait at least 3 minutes.
  1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
  2. Remove front pillar upper finishers. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the center console. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove the combination meter. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove audio unit. Refer to "REMOVAL AND INSTALLATION (TYPE 2) " or "REMOVAL AND INSTALLATION (TYPE 1) " (Base audio), or "REMOVAL AND INSTALLATION " (Premium audio).
  6. Remove cluster lid D. Refer to "REMOVAL AND INSTALLATION ".
  7. Remove the front passenger air bag module. Refer to "REMOVAL AND INSTALLATION ".
  8. Remove the instrument stay RH/LH bolts.
  9. Disconnect all remaining harnesses and electrical connectors.
  10. Remove instrument panel and pad assembly.
About FixVault