FixVault

ASCD Clutch Switch

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    Fig 1: ASCD Clutch Switch Component Inspection
    G00720498Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: ASCD Clutch Switch Test Parameters
    G00720497Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step 3 again.