FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 403 (Engine Control System) › DTC P0441: EVAP Control System › Diagnostic Procedure › 8. Check EVAP Control System Pressure Sensor Connector

8. Check EVAP Control System Pressure Sensor Connector

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect EVAP control system pressure sensor harness connector.
  2. Check connectors for water.

    Water should not exist. 

OK or NG 

  1. OK: GO TO 9.
  2. NG: Replace EVAP control system pressure sensor.
About FixVault