FixVault

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II. See Figure.
  3. Verify that "COOLAN TEMP/S" indicates less than 50°C (122°F).

    If the engine coolant temperature is above the range, cool the engine down. 

  4. Start engine and let it idle for at least 8 seconds.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".