Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.

INSPECTION START (WITH CONSULT-II)
With CONSULT-II
1. Turn ignition switch "ON" and select "SELF DIAGNOSIS" mode for A/T with CONSULT-II.
2. Touch "ERASE".
  1. GO TO 2.
CHECK DTC
Perform "DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE ".
1. GO TO 3.
CHECK DTC AGAIN
Is the "CONTROL UNIT (RAM)" or "CONTROL UNIT (ROM)" displayed again?

Yes or No
1. Yes: Replace TCM.
2. No: INSPECTION END