FixVault
Home › Nissan-Datsun › 2004 › 350Z 2D Convertible, Standard › Repair and Diagnosis › Engine Performance › System › 2004.5 - Engine Control System - Introduction › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
    Fig 1: Identifying FUEL PRESSURE RELEASE In WORK SUPPORT Mode With CONSULT-II Screen
    G03339084Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault