FixVault
Home › Nissan-Datsun › 2004 › Altima Base, Automatic › Repair and Diagnosis › Engine Performance › Engine Control System - 2.5L › DTC P0462, P0463: Fuel Level Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: Display CONSULT II (Data Monitor)
    G02884552Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault