FixVault
Home › Nissan-Datsun › 2004 › Altima Base, Standard › Repair and Diagnosis › Engine Performance › Engine Control System - 2.5L › DTC P0550: PSP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault