Hazard Reminder Check

CHECK HAZARD INDICATOR
Check if hazard indicator flashes with hazard switch.

Does hazard indicator operate?
1. Yes: GO TO 2.
2. No: Check "hazard indicator" Refer to "TURN SIGNAL & HAZARD WARNING LAMPS ".
SELF-DIAGNOSTIC RESULT CHECK
With CONSULT-II
- Select "BCM" on "SELECT SYSTEM" screen.
- Select "BCM C/U" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
- Check display content in self-diagnostic results.
  
  Fig 1: Consult-II Display Chart
  Courtesy of NISSAN MOTOR CO., U.S.A.
Contents displayed?
1. No malfunction: GO TO 3.
2. Malfunction in CAN communication system: After printing the monitor items, go to "CAN System". Refer to
  "CAN COMMUNICATION ".
3. Malfunction in diagnosis system or headlamp switch system "COMBINATION SWITCH INSPECTION ACCORDING TO SELF-DIAGNOSTIC RESULTS ".
CHECK HAZARD REMINDER OPERATION WITH CONSULT-II
With CONSULT-II
1. Select "ACTIVE TEST" in "MULT REMOTE ENT" with CONSULT-II.
2. Select "FLASHER RIGHT (CAN)" or "FLASHER LEFT (CAN)" and touch "ON".
  Hazard indicator should illuminate.
OK or NG?
1. OK: Hazard reminder operation is OK.
2. NG: Replace BCM.
  
  Fig 2: Scan Tool Display "Active Test"
  Courtesy of NISSAN MOTOR CO., U.S.A.