2. Check Overall Function-II

With CONSULT-II

Check "BRAKE SW2" indication in "DATA MONITOR" mode.

Fig 1: Checking Overall Function-II (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Overall Function-II (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Check voltage between ECM terminal 101 and ground under the following conditions.

Fig 3: Check Voltage Between ECM Terminal 101 And Ground (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Check Voltage Between ECM Terminal 101 And Ground (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG