FixVault
Home › Nissan-Datsun › 2004 › Frontier Base, Automatic › Repair and Diagnosis › Engine Performance › Engine Control System - KA24DE › DTC P0505: ISC System › DTC Confirmation Procedure › Testing Condition: › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00857326Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Wait at least 2 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault