FixVault
Home › Nissan-Datsun › 2004 › Maxima SE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTC › DTC P0182, P0183: FTT Sensor › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II. See Figure.
  3. Wait at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault