FixVault
Home › Nissan-Datsun › 2004 › Maxima SE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTC › DTC P0327, P0328: KS › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Start engine and run it for at least 5 seconds at idle speed.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault