FixVault
Home › Nissan-Datsun › 2004 › Maxima SE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTC › DTC P0605: ECM › DTC Confirmation Procedure › Procedure For Malfunction C › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and wait at least 1 second.
  4. Repeat step 2 to 3 for 32 times
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault