FixVault
Home › Nissan-Datsun › 2004 › Maxima SL, RE5F22A › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTC › DTC P1212: TCS Communication Line › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 10 seconds.
  4. If a 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: CONSULT-II Display Screen
G00877426Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault