FixVault
Home › Nissan-Datsun › 2004 › Maxima SL, RE5F22A › Repair and Diagnosis › Engine Performance › System › Engine Control System - Introduction › Basic Service Procedure › Idle Speed/Ignition Timing/Idle Mixture Ratio Adjustment › Inspection Procedure › 33. Check ECM Function

33. Check ECM Function

  1. Substitute another known-good ECM to check ECM function. (ECM may be the cause of an incident, but this is the rarely the case.)
  2. Perform initialization of NVIS (NATS) system and registration of NVIS (NATS) ignition key IDs. Refer to ECM RE-COMMUNICATING FUNCTION .
    1. GO TO 4 .
About FixVault