BCM (Body Control Module): Consult-II: Notes
CONSULT-II performs the following functions with combination of data receiving, command and transmission using the CAN communication line from the BCM.
BCM DIAGNOSTIC TEST ITEM CHART
| BCM diagnostic test item | Check item, diagnostic test mode | Content |
|---|---|---|
| Inspection by part | Work support | Changes setting of each function. |
| Self-diagnosis results | BCM performs self-diagnosis of CAN communication. | |
| Data monitor | Displays the input data of BCM in real time. | |
| Active test | Gives a drive signal to a load to check the operation. | |
| ECU part number | ECM part number can be read. |