FixVault
Home › Nissan-Datsun › 2004 › Murano SL, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P0102, P0103: MAF Sensor › DTC Confirmation Procedure › Procedure For DTC P0102 › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: DTC Confirmation Procedure With CONSULT-II (P0102)
    G00768005Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault