FixVault
Home › Nissan-Datsun › 2004 › Murano SL, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P0117, P0118: ECT Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: DTC Confirmation Procedure With CONSULT-II (P0117, P0118)
    G00768030Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault