Component Inspection

CAMSHAFT POSITION SENSOR (PHASE) 

1. Loosen the fixing bolt of the sensor.
2. Disconnect camshaft position sensor (PHASE) harness connector.
3. Remove the sensor.
4. Visually check the sensor for chipping.
   Fig 1: Checking Camshaft Position Sensor (PHASE) Chipping

   Courtesy of NISSAN MOTOR CO., U.S.A.
5. Check resistance as shown in the figure.
   Fig 2: Checking Resistance Between Camshaft Position Sensor Terminals (PHASE)

   Courtesy of NISSAN MOTOR CO., U.S.A.
   Fig 3: Camshaft Position Sensor Terminals Resistance Specifications (PHASE)

   Courtesy of NISSAN MOTOR CO., U.S.A.