FixVault
Home › Nissan-Datsun › 2004 › Murano SL, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P1124, P1126: Throttle Control Motor Relay › DTC Confirmation Procedure › Testing Condition: › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II
  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: DTC Confirmation Procedure With CONSULT-II (P1124)
    G00782685Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault