FixVault
Home › Nissan-Datsun › 2004 › Murano SL, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P1564: ASCD Steering Switch › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 10 seconds.
  4. Press "CRUISE" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press "ACCEL/RES" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Press "COAST/SET" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  7. Press "CANCEL" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  8. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault