FixVault
Home › Nissan-Datsun › 2004 › Murano SL, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P1715: Input Speed Sensor (Primary Speed Sensor) › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine.
  4. Drive vehicle at a speed of more than 50 km/h (31 MPH) for at least 5 seconds.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault