FixVault
Home › Nissan-Datsun › 2004 › Pathfinder SE, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P0112, P0113: IAT Sensor › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
    2. Fig 1: Data Monitor Display
    G00334457Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE  " .
About FixVault