FixVault
Home › Nissan-Datsun › 2004 › Pathfinder SE, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P0605: ECM › DTC Confirmation Procedure › Procedure For Malfunction B › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
  4. If 1st trip DTC is detected, GO TO "DIAGNOSTIC PROCEDURE  ".
About FixVault