FixVault
Home › Nissan-Datsun › 2004 › Pathfinder SE, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P1128: Throttle Control Motor › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If DTC is detected, GO TO "DIAGNOSTIC PROCEDURE  " .
    Fig 1: Data Monitor Display
    G00780857Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault