FixVault
Home › Nissan-Datsun › 2004 › Quest SL › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P1805: Brake Switch › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Fully depress the brake pedal for at least 5 seconds.
  3. Erase the DTC with CONSULT-II.
  4. Select "DATA MONITOR" mode with CONSULT-II.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  .
    Fig 1: Displaying Data Monitor Screen
    G00775947Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault