FixVault
Home › Nissan-Datsun › 2004 › Quest SL › Repair and Diagnosis › Engine Performance › System › Engine Control System › Injector Circuit › Component Inspection › Injector

Component Inspection: Injector

  1. Disconnect injector harness connector.
  2. Check resistance between terminals as shown in the figure.
    Fig 1: Checking Resistance Between Terminals
    G00776052Courtesy of NISSAN MOTOR CO., U.S.A.
    1. Resistance: 13.5 - 17.5ohm [at 20°C (68°F)] 
About FixVault