Hazard Reminder Check

WARNING: This page is about a different car, the 2004 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HAZARD INDICATOR
Check if hazard indicator flashes with hazard switch.

Does hazard indicator operate?
1. Yes: GO TO 2.
2. No: Check "hazard indicator" Refer to "TURN SIGNAL & HAZARD WARNING LAMPS ".
SELF-DIAGNOSTIC RESULT CHECK
With CONSULT-II
- Select "BCM" on "SELECT SYSTEM" screen.
- Select "BCM C/U" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
- Check display content in self-diagnostic results.
  
  Fig 1: Consult-II Display Chart
  Courtesy of NISSAN MOTOR CO., U.S.A.
Contents displayed?
1. No malfunction: GO TO 3.
2. Malfunction in CAN communication system: After printing the monitor items, go to "CAN System". Refer to
  "CAN COMMUNICATION ".
3. Malfunction in diagnosis system or headlamp switch system "COMBINATION SWITCH INSPECTION ACCORDING TO SELF-DIAGNOSTIC RESULTS ".
CHECK HAZARD REMINDER OPERATION WITH CONSULT-II
With CONSULT-II
1. Select "ACTIVE TEST" in "MULT REMOTE ENT" with CONSULT-II.
2. Select "FLASHER RIGHT (CAN)" or "FLASHER LEFT (CAN)" and touch "ON".
  Hazard indicator should illuminate.
OK or NG?
1. OK: Hazard reminder operation is OK.
2. NG: Replace BCM.
  
  Fig 2: Scan Tool Display "Active Test"
  Courtesy of NISSAN MOTOR CO., U.S.A.