Room Lamp Operation Check

WARNING: This page is about a different car, the 2004 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK INTERIOR LAMP
Check if the room lamp switch is in the ON position and the lamp illuminates.

Does interior lamp illuminate?
1. Yes: GO TO 2
2. No: Check interior room lamp circuit. Refer to "INTERIOR ROOM LAMPS ".

CHECK INTERIOR LAMP OPERATION

With CONSULT-II

Select "ACTIVE TEST" in "MULTI-REMOTE CONT SYS" with CONSULT-II.

Select "INT ILLUM" and touch ON.

Room lamp should illminate.

Fig 1: Scan Tool Display "Active Test"

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Push unlock button of key fob with all doors closed and driver's door locked, and check voltage between BCM harness connector M20 terminal 32 (R) and ground.

BCM HARNESS CONNECTOR VOLTAGE CHART

Key Fob	Voltage [V]
Unlock button is pushed.	: 0 (Approx. 30 seconds)
Unlock button is not pushed	: Battery voltage

OK or NG

OK: System is OK.
NG: Check harness open or short between BCM and room lamp.

Fig 2: BCM Harness Connector & Ground Voltage Test
Courtesy of NISSAN MOTOR CO., U.S.A.