MAINSHAFT End Play: Notes
- When adjusting the mainshaft end play, select the adjusting shim for the mainshaft rear bearing. To select the adjusting shim, measure clearance "M" between the transaxle case and mainshaft rear bearing.
- Calculate the dimension "P" (thickness of adjusting shim) using the following procedure to meet specification of end play for mainshaft rear bearing.
End play: 0 - 0.06 mm (0 - 0.0024 in)
Dimension "P" = "M" + End play
"P": thickness of adjusting shim
"M": Distance between mainshaft rear bearing and transaxle case
CAUTION: Only 1 adjusting shim can be selected.