FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › Brakes › Traction Control › Brake Control System - Abs & Abs/TCS › On Board Diagnostic System Description › CONSULT-II Inspection Procedure › Data Monitor Procedure

Data Monitor Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to Data Link Connector.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 1: Touch "Start" On Consult-II Screen
    G00850639Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 2: Touch "ABS" On Consult-II Screen
    G00850640Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
    Fig 3: Touch "Data Monitor" On Consult-II Screen
    G00850641Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault