FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › Engine Performance › System › Engine Control System - Qr25DE › DTC P1031, P1032: A/F Sensor 1 Heater › Diagnostic Trouble Code (DTC) Confirmation Procedure › Testing Condition: › With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Start engine and run it for at least 10 seconds at idle speed.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Selecting Data Monitor Mode With Consult-II
G00778070Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault