FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › Engine Performance › System › Engine Control System - Qr25DE › DTC P2135: TP Sensor › Diagnostic Trouble Code (DTC) Confirmation Procedure › Testing Condition: › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Selecting Data Monitor Mode With Consult-II
G00779500Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault