Trouble Diagnosis Symptom Chart

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Make sure other systems using the signal of the following systems operate normally.

TROUBLE DIAGNOSIS SYMPTOM CHART (1 OF 2)

Symptom	Repair order	Refer to
None of the power windows can be operated using any switch.	BCM power supply and ground circuit check	BCM POWER SUPPLY AND GROUND CIRCUIT CHECK
	2. Power window main switch power supply and ground circuit check	POWER WINDOW MAIN SWITCH POWER SUPPLY CIRCUIT CHECK
	3. Power window serial link check	POWER WINDOW SERIAL LINK CHECK
	4. Replace BCM.	REMOVAL AND INSTALLATION OF BCM
Driver side power window alone does not operate.	Power window regulator (driver side) circuit check	FRONT POWER WINDOW REGULATOR (DRIVER SIDE) CIRCUIT CHECK
Driver side power window alone does not operate.	2. Replace power window main switch	DOOR FINISHER
Front passenger side power window alone does not operate.	Front power window switch (passenger side) power and ground circuit check	FRONT POWER WINDOW SWITCH (PASSENGER SIDE) POWER SUPPLY AND GROUND CIRCUIT CHECK
	2. Power window serial link check	POWER WINDOW SERIAL LINK CHECK
	3. Front power window regulator (passenger side) circuit check	FRONT POWER WINDOW REGULATOR (PASSENGER SIDE) CIRCUIT CHECK
	4. Replace BCM.	REMOVAL AND INSTALLATION OF BCM
Rear LH side power window alone does not operate.	Rear power window regulator (LH) circuit check	REAR POWER WINDOW REGULATOR (LH) CIRCUIT CHECK
Rear RH side power window alone does not operate.	Rear power window regulator (RH) circuit check	REAR POWER WINDOW REGULATOR (RH) CIRCUIT CHECK
Anti-pinch system does not operate normally (driver side).	Door window sliding part malfunction A foreign material adheres to window glass or glass run rubber. Glass run rubber wear or deformation. Sash is tilted too much, or no enough.	-
	2. Limit switch adjusting	RESETTING OF LIMIT SWITCH
	3. Limit switch circuit check (driver side)	LIMIT SWITCH CIRCUIT CHECK (DRIVER SIDE)
	4. Encoder circuit check (driver side)	ENCODER CIRCUIT CHECK (DRIVER SIDE)
Anti-pinch system does not operate normally (passenger side).	Door window sliding part malfunction A foreign material adheres to window glass or glass run rubber. Glass run rubber wear or deformation. Sash is tilted too much, or no enough.	-
	Limit switch adjusting	RESETTING OF LIMIT SWITCH
	3. Limit switch circuit check (passenger side)	LIMIT SWITCH CIRCUIT CHECK (PASSENGER SIDE)
	4. Encoder circuit check (passenger side)	ENCODER CIRCUIT CHECK (FRONT PASSENGER SIDE)
Power window retained power operation does not operate properly.	Check the retained power operation mode setting.	ACTIVE TEST
	2. Door switch check	DOOR SWITCH CHECK
	3. Replace BCM.	REMOVAL AND INSTALLATION OF BCM
Does not operate by key cylinder switch.	Door key cylinder switch check	FRONT DOOR KEY CYLINDER SWITCH (DRIVER SIDE) CHECK
Does not operate by key cylinder switch.	2. Replace power window main switch	DOOR FINISHER
Power window lock switch does not function.	Power window serial link check	POWER WINDOW SERIAL LINK CHECK
Power window lock switch does not function.	2. Power window lock switch check	POWER WINDOW LOCK SWITCH CHECK
Auto operation does not operate but manual operates normally. (driver side)	Encoder circuit check (driver side)	ENCODER CIRCUIT CHECK (DRIVER SIDE)
	2. Replace power window main switch	DOOR FINISHER

TROUBLE DIAGNOSIS SYMPTOM CHART (2 OF 2)

Symptom	Repair order	Refer to
Auto operation does not operate but manual operates normally. (passenger side)	Encoder circuit check (passenger side)	ENCODER CIRCUIT CHECK (FRONT PASSENGER SIDE)
	2. Replace front power window switch (passenger side)	DOOR FINISHER