Link and Wire Assembly
WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before replacing a suspect part, carefully ensure it is the source of noise being experienced.
- Check link to determine if coating film has peeled off to such an extent that substrate is visible. Check also to determine if link is the source of noise. If it is, replace it.
- Visually check to determine if a sufficient amount of grease has been applied to wire or rail groove. If not, add grease as required.
- Check wire for any damage or deterioration. If any damage is found, replace wire.