Automatic Operation

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

AUTOMATIC OPERATION

Function		Description
Memory operation		The seat, pedal (accelerator, brake) and door mirror move to the stored driving position by pushing memory switch (1 or 2).
Entry/Exiting function	Exiting operation	At Exit, the seat moves backward. (Exiting position)
Entry/Exiting function	Entry operation	At entry, the seat returns from Exiting position to the previous driving position before the Exiting operation.
Key fob interlock operation		Perform memory operation, turnout operation and return operation by pressing key fob unlock button.

NOTE:

Disconnecting the battery erases the stored memory.
After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open)-->OFF (close)-->ON (open), the Entry/Exiting function becomes possible.
After Exiting operation is carried out, return operation can be operated.

AUTOMATIC OPERATION

Auto operation temporary stop conditions.

When ignition switch turned to START during memory switch operation and return operation, memory switch operation and return operation is stopped.

Auto operation stop conditions.

When the vehicle speed becomes 7 km/h (4 MPH) or higher. (memory switch operation and entry operation)
When the setting switch, memory switch 1, or 2 are pressed.
When CVT selector lever is in any position other than P.
When the door mirror remote control switch is operated (when ignition switch or ACC switch turned to ON).
When power seat switch turned ON.
When pedal adjusting switch turned ON.
When driver seat sliding Entry/Exiting setting is OFF (entry/exiting operation).

NOTE: During automatic operation, if the ignition switch is turned ON-->START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.