FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1019 (Auto Light System) › Auto Light System › CONSULT-II Function › Work Support › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "HEAD LAMP" on "SELECT TEST ITEM" screen.
  2. Touch "WORK SUPPORT" on "SELECT DIAG MODE" screen.
  3. Touch "CUSTOM A/LIGHT SETTING" or "ILL DELAY SET" on "SELECT WORK ITEM" screen.
  4. Touch "START".
  5. Touch "NORMAL" or "MODE 2 - 4" of setting to be changed (CUSTOM A/LIGHT SETTING), Touch "MODE 1-8" of setting to be changed. (ILL DELAY SET)
  6. Touch "SETTING CHANGE".
  7. The setting will be changed and "CUSTOMIZING COMPLETED" will be displayed.
  8. Touch "END".
About FixVault