Lighting Switch Inspection

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK LIGHTING SWITCH
Select "BCM" in CONSULT-II. Operate lighting switch via "AUTO LIGHT SW" on data monitor screen, and make sure light turns on and off as commanded.
1. Lighting switch AUTO: ON
2. Lighting switch OFF: OFF
OK or NG
1. OK >> INSPECTION END.
2. NG >> Replace lighting switch.
Fig 1: Displaying Auto Light SW Data Monitor
Courtesy of NISSAN MOTOR CO., U.S.A.