Consult-II Basic Operation

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn ignition switch ON.

Fig 1: Locating Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START(NISSAN BASED VHCL)".

Fig 2: Displaying "START(NISSAN BASED VHCL)" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "BCM" on "SELECT SYSTEM" screen. If "BCM" is not indicated, Refer to CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT in GENERAL INFORMATION artilcle.

Fig 3: Displaying "BCM" On "SELECT SYSTEM" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.

Fig 4: Displaying "SELECT TEST ITEM" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.