Procedure For Malfunction C

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Turn ignition switch ON and wait at least 1 second.
Select "DATA MONITOR" mode with CONSULT-II.
Shift selector lever to D position and wait at least 2 seconds.
Shift selector lever to N, P position.
Start engine and let it idle for 3 seconds.
If DTC is detected, go to DIAGNOSTIC PROCEDURE .

Fig 1: Display Data Monitor Screen
Courtesy of NISSAN MOTOR CO., U.S.A.

With GST

Follow the procedure "With CONSULT-II" above.