Door Mirror LH Defogger Circuit Check
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DOOR MIRROR DEFOGGER POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect door mirror LH.
- Turn ignition switch ON.
- Check voltage between door mirror LH connector and ground.
DOOR MIRROR LH CONNECTOR VOLTAGEConnector Terminal (Wire color) Condition Voltage (V)(Approx.) (+) (-) D13 6(L/B) Ground Rear window defogger switch ON Battery voltage Rear window defogger switch OFF 0 OK or NG
- OK: GO TO 2.
- NG: Repair or replace harness.
- CHECK DOOR MIRROR DEFOGGER GROUND CIRCUIT
- Turn ignition switch OFF.
- Check continuity between door mirror LH connector D13 terminal 5 and ground.
- 5 (B) - Ground: Continuity should exist.
OK or NG
- OK: GO TO 3.
- NG: Repair or replace harness.
- CHECK DOOR MIRROR DEFOGGER
- Connect door mirror LH.
- Check continuity between door mirror LH connector D13 terminals 5 and 6.
- 6 (L/B) - 5 (B): Continuity should exist.
OK or NG
- OK: Repair or replace harness.
- NG: Replace door mirror LH.