FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1086 (Manual HVAC System) › Ambient Sensor › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ambient sensor connector
    NOTE: The ambient sensor is located behind the front bumper opening, in front of the condenser.
  2. Release the ambient sensor clip and then remove the ambient sensor.
  3. Installation is in the reverse order of removal.
    Fig 1: Disconnecting Ambient Sensor Connector
    G00848989Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault