FixVault
Home › Nissan-Datsun › 2004 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 1110 (Engine Control System) › DTC P1564: ASCD Steering Switch › DTC Confirmation Procedure › With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 10 seconds.
  4. Press "CRUISE" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press "ACCEL/RES" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Press "COAST/SET" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  7. Press "CANCEL" switch for at least 10 seconds, then release it and wait at least 10 seconds.
  8. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault